If you don’t maintain the garage door, properly you are likely to face the garage door breakdown described in this article.
A garage door is a piece of equipment that functions with vastly different interconnected parts.
It involves electrical, electronic, and mechanical parts.
Some are discrete parts, and some are subassemblies.
These could include doors, lifting cables, springs, hinges, door rollers, door tracks, door openers, electrical cables, and sensors.
The garage door has a function to perform, and it is supposed to perform without any problems.
But as it happens with pieces of equipment, any one of the parts or subassemblies can malfunction, leading to a breakdown and garage door repair.
Here’s a look at four things that can cause your garage door to break down.
Door Opener System
The garage door opener system controls the opening and closing of the garage door.
Typically, this system is operated with a remote.
The remote is used to trigger the opener to open or close.
As such, the remote and opener can malfunction and signal a breakdown of the garage door.
The breakdown could occur in the remote or the door opener.
The number of times you open and close the door determines the wear and tear.
The door opener system is perhaps one of the four major breakdown causes.
Typically, there is a pair of springs attached to the garage door to act as a counterbalance to the door’s weight.
The springs also help to keep the door suspended in the air.
Since the opening and closing of doors take place regularly, the springs often work.
The springs hold a tremendous amount of potential energy, released whenever needed.
The springs have a life of 10,000 cycles of open and close operation.
Springs are subject to wear and tear and can cause breakdowns.
The wear and tear of the springs can cause the springs to snap and cause a breakdown in the garage door.
Roller and track
The roller and track system ensures the smooth movement of the door open and close phases.
It is somewhat similar to a train running on tracks.
The rollers and tracks play whenever the garage door is opened or closed.
Therefore, there is sufficient wear and tear of the rollers and the tracks.
So, you could encounter a breakdown when the rollers wear out or when the alignment of the track is off.
This could result in the door getting stuck.
Sometimes, foreign particles such as a piece of stone could get stuck on the track and impede the movement of the roller, causing a breakdown.
The pulley and cable system
In conjunction with springs, the pulley and cable system help open and close the garage door smoothly.
This system works similarly to an elevator, and it absorbs tension when the cycle of open and close operates.
Thus, says Medium, the pulley, and cable system is subject to a lot of wear and tear.
The garage door cannot open or close if the cable comes off the pulley.
Therefore, the pulley and cable system can cause a breakdown more often than other parts.
The cable could also get frayed due to wear and tear and snap, causing a breakdown and becoming a serious injury threat.
Any breakdown in the garage door is a safety hazard, and you must immediately get in touch with a garage door company and seek a garage repair cost from A1Garage.com and attend to the problem at hand.
Remember, the garage door is a system of solid parts, most of them moving.
The garage door is subject to a lot of wear and tear due to constant usage, especially when it is used as the main point of entry to the house or exit from the home.
If you don’t maintain the garage door, properly you are likely to face the breakdowns described above.