Skip to Content

7 Electrical Problems Everyone Should Know and Their Solutions 

Electrical problems are common and scary. When they experience an electrical problem, many people do not know how to handle it. When you have an electrical problem in your workplace or home, it can damage appliances and pose a risk to people’s lives and the property. Therefore, it is best when faced with an electrical issue; you contact a professional electrician from Chicago, Illinois, recommends the experts at Bates Electric. Some ways you can tell there is an electrical problem are flickering lights, high electrical bills, and warm power switches to touch. Below are electrical problems everyone should know and their solutions. 

1. Lighting problems 

Everyone knows and has experienced how frequently light bulbs burn out. If this is the case in your home or work area. It is an indication that you have an electrical problem. The reasons bulbs burn out is due to high voltage, wattage is too high, bad wiring on the circuit or mains, or the bulb is fixed tightly. If this is a common problem, you can check if the holder is loose. And have a professional come and see the root of the problem. Solve in the same way if you are experiencing flickering lights and dim or too bright lighting. 

 2. High electricity bills 

Are your bills constantly getting more costly? There are reasons why this is the case. Such as leakage in electrical systems, damaged circuits, and wiring, among others. The solution for this is easy as you can reduce your electricity cost by choosing to use cost-effective appliances. Also, unplug appliances when you are not using them. Have an electrician come and repair damaged wires and check if there is another cause of the high electrical bill. 

3. Tripping circuit breaker 

In many cases, the cause of a tripping circuit breaker is when many high-power-consuming appliances are using power from the same source. This causes a high chance of your breaker getting tripped. Although it is a good sign, showing that your home is protected as the circuit breaker is working as it should. The solution would be to reduce the number of appliances with high consumption power that are drawing from the same source. You can opt to also use lower settings. If the problem persists after trying this, call in a qualified electrician to check what else could be causing the tripping. 

Electricity short circuit / Electrical failure resulting in electricity wire burnt

4. Electrical surges 

This occurs due to damaged power lines, faulty lines, and sometimes when lighting strikes. These are common electrical problems, and they last for a few seconds. Therefore, if you notice electrical surges often, they can damage your equipment and lower its life expectancy. Check the connections that connect the device to the home or work grid to solve this. Disconnect the devices or the poor-quality power boards from the outlet. This should make the surges stop. If they do not, you should call an electrician in Sydney like Crawford Electrical

5. Aluminum wiring 

When conducting electricity, aluminum is a metal that is susceptible to oxidation. Thus, when it comes into contact with other materials like plastic and wood, it can cause a fire. For this reason, it is best to use copper over aluminum. Copper is not only cheaper, but it does not have the oxidation properties of aluminum and is equally ductile. (Source: Britannica)

6. Electrical shocks 

Electrical shocks are common, and for many people, it has happened to them. For instance, you turn an appliance on or off and experience electrical shock. This indicates that the appliance has an electrical issue that should be checked, even though the shocks are mild, The Spruce. Also, it can be an issue with the wiring of the appliance. The solution is to plug in a different appliance to see if the problem is the same. If it is similar, contact an electrician to sort out the problem before someone gets hurt. 

7. Switches of light not working 

When you have a switch in your home or office not working. This is a result of poor quality products or poor workmanship. Still, it can be a faulty circuit, wiring, or outlet (NCBI). To solve this issue, consult a professional electrician as it shows an electrical problem. 

error: Content is protected !!