Being a mother, you will be involved with a lot of projects around the house. Right from doing some child proof interior decorating to trying out new backyard landscaping ideas. Painting your home’s walls is one such project that you will have to take up from time to time. And contrary to popular belief, painting walls on your own is not rocket science – given that you’re doing professionally.
In order to get a professional looking finish with your wall painting, you need to have the right tools in hand – such as the masking tape. Without using the right tape, your paint job will be messy. And even with the tape, you need to apply it correctly or else it may lead to smudges and leaks. Using the masking tape the right way will make it easy for you to achieve cleaner results. Let’s look into a few tips as to how you can go about doing that…
#1: Do the Preparation
Before you begin your wall painting adventure, you need to get prepared for it. Start by buying a high quality masking tape such as the Scotch Blue Painters Masking Tape from iTape, as it removes cleanly and painlessly without any surface damage or adhesive transfer. Next, clean the walls along with the baseboards and trim using a damp towel. This step is necessary because tape adheres much better to a clean and dry surface. Not only that, it also helps in preventing the paint from seeping underneath.
#2: Apply the Tape Properly
Cover the perimeter of door trim/windows and the tops of baseboards with the tape. Tear off about 3 to 4 feet of tape at once so that it’s much easier to work with and also overlap the ends by some inches. Apply the tape along the baseboards’ top and use your fingers to smooth it down. This way you’ll be sticking it on the baseboards’ top, with the tape hanging out. This basically creates a “shelf” for catching drips. Fold tape just under half inch to create a clean edge that fits into corners easily.
#3: Paint Along the Tape
Now is the time to paint along the tape using a quality angled brush. See to it that you’re moving the brush in the same direction so that you’re making a straight line. And also paint a few inches up so that it fills the space that cannot be reached with a roller. In order to prevent lines or uneven lumps, you should try using a (light) even coat of paint. Don’t allow the paint to pool against the masking tape. It’s much better to apply a 2nd coat of paint than putting a lot of paint that creates a sticky mess.
#4: Remove Tape Gently
So when is the right time to remove the tape? In about a few hours when you know the paint has dried to an extent. Go on and remove the paint slowly and gently. Do it by holding it close to your baseboard so that you don’t end up making the paint peel. Once removed, throw away the used tape.