You did your research on toilet rated and picked the best toilet. It’s worked fine but now you have an issue.
The toilet is running – what can you do to stop it?
Your toilet flushes fine, but then the water just continues to run, all the time. This situation can get on your nerves over time, and if it continues, you can also end up wasting a significant amount of water. Fortunately, this type of issue can be resolved easily. There are only a few problems that could be causing it to happen.
That being said, you may still prefer to get help with resolving the issue. Just pick up the phone, and call a plumber in Mosman. They should quickly be able to return your toilet to normal working order. If you do want to try and deal with the problem yourself, here are some tips which you should find useful.
Taking a look inside the tank
When you look inside the tank of the toilet, you can see the parts that could be causing your issue. You need to see how the different parts react when you flush. So, take the lid off the tank, and flush the toilet while you watch what happens.
Flushing the toilet causes the chain to lift the flapper. This means that water can flow into the bowl of the toilet. As soon as the water in the toilet tank drops, the flapper drops. This is when the tank begins to refill. If the water level in the tank becomes too high, water is taken away by the overflow tube.
What is causing the problem
Once you know which parts are inside a toilet tank, you can start to work out what is causing the water to run.
If the tank does not fill effectively after you have flushed, there is a good chance that there is an issue with the flapper. This is usually caused by the flapper being stuck, and you can simply close it with your hand. If the problem keeps happening, you may have to re align the flapper. This should solve the issue with the constant running of water. If it does not work, you need to focus your attention on the ball float.
The tank should stop filling when the water is approximately one inch below the rim of the overflow tube. If this is not happening, you need to make an adjustment to the ball float. If this does not work, you should check if there is any water in the ball. If this is the case, you will need to speak to a plumber or attempt to replace the ball float yourself.
The issue of constantly running water in a toilet is not normally difficult to resolve, as there are not many issues that can be the cause. Many people decide to try and solve the problem themselves, but this does not mean that you have to. If you are concerned about dealing with the issue, or the actions you take are unsuccessful, you should seek help from a professional.