It should be said before you get to work on your electrical project, that if you are not completely sure and well-equipped enough to handle such a dangerous task on your own, you should contact a professional instead of taking a chance. Electrical work is a risky venture and if you’re not careful, you most likely will be electrocuted and nobody wants that. If you are ready, however, here are some tips on how to handle electrical repairs by yourself.
Before you get started, you must check that you have the tools required for this particular work. Some basic required tools are insulated wire cutters, insulated needle nose pliers, insulated gloves, wire nuts, replacement wires, electrical tape and, of course, safety goggles. Prior to ANY kind of electrical work, you absolutely must disconnect the stream of electricity to the device you’re working on, so that you aren’t shocked. Never work on hot wires, it’s an unnecessary risk.
One of the most common problems you will come across is a faulty light switch. You first must locate the source of the power that sends electricity to the light switch; if the source wire is connected to more than one switch, you will have to disconnect the second switch.
You may be greeted with a tangle box, which is a box where multiple wires reside. Don’t get intimidated by the number of wires in the box though, just focus on the wire that is connected to the switch you’re working on. Be sure to disconnect and reconnect the wires one at a time. Once you have replaced all of the wires, simply place the switch back into place and you’re done.
Most electrical jobs are conducted in the same basic fashion:
- Reconnect like-color wires with each other, never cross-connect.
- Keep the power off and make sure that it cannot turn back on accidentally.
- Be sure to use insulated tools.
The most important part of electrical work is avoiding being shocked, if you’re at all unsure about completing the work, be sure to contact a contracting company such as Mr Sparky Electrical Services. A company like that will get the job done safely, quickly and at an affordable rate. It’s just not worth taking the risk when professionals are so available.
Test lights, or multimeters, are utterly crucial for electrical work. A multimeter is placed in an electrical socket or on a wire junction. If electricity is running through the object or it is currently charged, a light will flash on the tool. If the light is on, do not touch the wire or socket, you will be electrocuted!
Easily avoidable mistakes occur to everybody, it’s not necessarily their fault. You must know the fundamentals of any kind of work, electrical work especially. To avoid injury and to ensure a job-well-done, be sure to take these tips into consideration. Simple tasks can be done yourself, it just takes knowledge of the materials and what exactly you’re dealing with.